EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine

EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine

Product Details:

Place of Origin: China
Brand Name: GWELL
Certification: CE
Model Number: GWS120/GWS160/GWS180

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiable
Delivery Time: 90 days after all the technical requirements are confirmed
Payment Terms: L/C, T/T
Supply Ability: 200 sets per year
Get Best Price Contact Now

Detail Information

Product Name: EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine Machine Type: Cast Film Machine/PV Solar Film Machine
Brand: GWELL Suitable Material: EVA/POE
Width: 1100mm 1200mm 1300mm 2200mm 2400mm 2600mm Die Lip Gap: 0.5/0.7mm(depends On Customers)
Screw Design: Single Screw Design Film Structure: Single Layer Film
Country Of Origin: China Market Share: Over 80% Of This Machine In Chinese Market
Warranty: One Year After-sales Service: Installation And Machine Debug
High Light:

Low Shrinkage EVA Solar Cell Encapsulation Film Line


Solar Cell Encapsulation Cast Film Extrusion Process


EVA Solar Panel Encapsulation Film Production Line

Product Description

EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine


1. Features of EVA solar film line

(1) High transparency and high adhesion can be applied to various interfaces and used for bonding glass and silicon wafers.

(2) Good durability can resist high temperature, moisture, ultraviolet rays and so on.

(3) Easy to store. Stored at room temperature, the adhesion of EVA is not affected by humidity and water-absorbent film.


2. Characteristics of POE polyolefin film machine

(1) POE has the general characteristics of thermoplastic elastomers. The soft chain curling structure of octene and the crystalline vinyl chain are used as physical crosslinking points, making it both excellent toughness and good processability;

(2) The price is low and the relative density is small, so the volume and price are low;

(3) Excellent heat resistance and cold resistance, and a wide using temperature range;

(4) Weather resistance, good aging resistance, because there are no unsaturated double bonds in the molecular structure of POE plastics, it has excellent aging resistance;

(5) Oil resistance, compression permanent deformation and abrasion resistance are not good;

(6) POE plastics have narrow molecular amount distribution, good fluidity, and good compatibility with polyolefins;

(7) Good fluidity can improve the dispersing effect of the filler and at the same time increase the weld line strength of the product.


3. Performance characteristics of Gwell EVA/POE film production machine

(1) The cast extruder adopts EVA special single screw extrusion and POE special single screw extrusion. The screw barrel constant temperature circulating water cooling system solves the technical difficulties of EVA/POE plasticization and non-crosslinking.

(2) The roller body adopts double-sided embossing, and solves the technical difficulties of the film sticking to the roller.

(3) The cooling part adopts cooling rollers and stress-relieving cooling beds to make the film run smoothly and fully shaped to ensure that the shrinkage rate is less than 3%.

(4) The whole line adopts PLC automatic control to realize the operation of man-machine interface.

(5) The production line is equipped with an online quality monitoring and control system to ensure the product qualification rate.

(6) Patented design micro-tension winder, the line speed of the whole machine production line can reach 18m/min


4. Specification of single-extruder production line:

Extruder type GWS160 GWS160 GWS180 GWS180
Product width 2200mm, 2400mm, 2600mm
Product thickness 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm
Maximum linear speed 10m/min ,12m/min,15m/mn


5. Specification of co-extrusion production line:

Extruder type Co-extrusion GWS160+GWS160 Co-extrusion GWS180+GWS160 Co-extrusion GWS180+GWS180
raw material EVA ,POE EVA ,POE EVA,POE
layers A,A/B/A
Product width 2400mm,2600mm
Product thickness 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm
Maximum linear speed 15m/min, 16m/mn, 18m/min



EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine 0


6. Company brief introduction
Gwell plastic transparent sheet unit production line absorbs and digest western country advanced extrusion technology. And its main parts choose from all over the world (such as screw, barrel, roller, etc.). The energy consumption of its complete sets of equipment , intelligent, automation, safety standard, technology standard, etc., have been at or near the world standard of the product. This series of products has a number of inventions and utility model patents so that it replaces imported equipment, and has a cost-effective advantage. The high-level transparent plate products are widely used in optics, home appliances, construction engineering, decoration, furniture, advertising, handicrafts and other industries and civil industries. Its quality has reached the world's product performance, and we have a matching team of experts and process engineers to help users debug, produce high-quality products.



EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine 1



Want to Know more details about this product
I am interested in EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine could you send me more details such as type, size, quantity, material, etc.
Waiting for your reply.